Back

System for waterproofing and installing floor and wall coverings with ready-to-use products in newly constructed damp environments

New building

Wet environments

Waterproofing

Products

Discover the products used for this solution and other alternative products

Concrete substrate

Uncoupling layer

Screed

TOPCEM PRONTO

Position a series of levelling guides, spread the mix, carefully compact the mix and float-finish the surface.

Ready-to-use waterproofer

MAPEGUM WPS

Apply two layers of product with a trowel, roller or brush to form a total thickness of at least 0.8 mm.

Rubber tape

MAPEBAND PE 120

Apply the elastic tape for fillet joints on the first layer of MAPEGUM WPS while still fresh.

Adhesive

KERAFLEX

Apply the adhesive on the substrate with a notched trowel suitable for the type and format of the tiles to ensure the back of the tiles is sufficiently wetted. Use the double-buttering method where specified by UNI 11493-1.

Ceramic tiles

Grout

KERAPOXY CQ

Once the adhesive has set, carefully fill the grouts to their full depth using a rubber trowel without leaving gaps or steps.

Sealant

MAPESIL AC

Seal the perimeter and expansion joints after inserting MAPEFOAM to set the correct depth.

Plasterboard

Adhesive

ULTRAMASTIC III

Apply the adhesive on the substrate with a notched trowel suitable for the type and format of the tiles to ensure the back of the tiles is sufficiently wetted.

Ceramic tiles